* Please refer to the English Version as our Official Version.
Onsemi, a smart power and sensing technology provider, announced that it will supply Kempower with onsemi EliteSiC SIC MosFEts and diodes for scalable electric vehicle (EV) chargers under a new strategic agreement. The ongoing collaboration between the two companies enables Kempower's suite of EV charging solutions to employ a variety of power semiconductor technologies, including onsemi's EliteSiC.
Onsemi introduces the Hyperlux line of automotive image sensors with a 2.1µm pixel size, industry-leading 150dB ultra-high dynamic range (HDR) and LED flicker reduction (LFM) capabilities to deliver high performance, high speed and advanced features across the temperature range of automotive applications. Advancing the development of the next generation of Advanced Driver assistance systems (ADAS). HyperLux also supports a smooth transition to L2+ level autopilot, which only requires the driver to take over the wheel when alerted by the technology.
Onsemi has launched the latest generation of 1200V EliteSiC Silicon Carbide (SiC) M3S devices to help power electronics engineers achieve greater energy efficiency and lower system costs. The new product line includes EliteSiC MosFeTs and modules that help increase switching speeds for a growing number of 800-V electric vehicle (EV) on-board chargers (OBCs) and energy infrastructure applications such as EV DC fast charging, solar solutions, and energy storage.
Onsemi announced that it has delivered its billionth induction sensor interface integrated circuit (IC) to HELLA, an international automotive parts supplier and part of the FORVIA Group. The ON designed IC is used in HELLA's contactless Inductive Position Sensor (CIPOS®) technology for automotive drive-by-wire systems. Over 25 years of collaboration, the two companies have developed innovative designs that reduce the size of the HELLA module and ON IC to better fit applications with high dimensional requirements for modules.
Onsemi and luxury smart pure electric brand Krypton Intelligent Technology (ZEEKR) announced the signing of a long-term supply agreement (LTSA). Ansamey will provide Polkrypton with EliteSiC silicon carbide (SiC) power devices to improve the energy efficiency of its smart electric vehicles (EVs), resulting in improved performance, faster charging and longer range.
Onsemi announced the launch of an innovative image sensor - AR0822. The embedded High Dynamic Range (eHDRTM) function and optimized Near Infrared (NIR) response of this device are crucial for applications with harsh lighting conditions, such as security monitoring, portable cameras, doorbell cameras, and robots. The low-power architecture and motion wake-up function of this sensor aim to significantly reduce system power consumption.
ON's Bluetooth LE devices have been making waves in the industry for several years. In 2017, Anson released the RSL10, its first product in Bluetooth LE. This was followed by the release of the RSL15 in 2021, after which Anson continued to develop new devices in Bluetooth LE specifications. Each device has multiple family products
The SA572 is a dual-channel high-performance gain control circuit in which either channel can be used for dynamic range compression or extension. The buffer allows independent control of dynamic attack and recovery times with minimal external components and improved low-frequency gain control of ripple distortion than previous compilers. Noise reduction for high performance audio systems. It can also be used in a wide range of communication systems and video recording applications.
Available at 300 mA LDO, the NCP703 provides engineers with very stable, precise voltage, ultra-low noise and very high power supply rejection ratio (PSRR) for RF applications. The device does not require any additional noise bypass capacitors to achieve ultra-low noise performance.
The ADT7475 controller is a thermal monitor and multi-PWM fan controller for noise-sensitive or power-sensitive applications requiring active system cooling. The effectiveness of the system's thermal solution can be monitored using THERM inputs. The ADT7475 also uses two-way THERM pins as an output to provide critical thermal protection to the system to prevent overheating of the system or components.
The KA3846 control IC provides all the necessary features to achieve a fixed frequency, current mode control scheme while maintaining a minimum number of external parts. The superior performance of this technology can be measured by improved line regulation, enhanced load response characteristics, and simpler, easier to design control loops.
The CAT5114 is a single digital potentiometer designed as an electronic substitute for mechanical potentiometers and fine tuning potentiometers. They are very suitable for automatic adjustment on mass production lines, as well as applications where equipment requiring periodic adjustment is difficult to access or located in hazardous or remote environments.
The MM74HC259 device utilizes advanced silicon-gate CMOS technology to implement an 8-bit addressable latch, designed for general purpose storage applications in digital systems
The LM2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step−down switching regulator (buck converter). All circuits of this series are capable of driving a 3.0 A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5.0 V, 12 V, 15 V, and an adjustable output version.
The FAN6555 switching regulator is designed to convert the voltage from 2.3V to 4V to the output voltage or termination voltage required for DDR SDRAM memory. FAN6555 can also be used with series termination resistors to provide an excellent voltage source for active termination schemes for high-speed transmission lines, as seen in high-speed memory bus and distributed backplane designs.
The MC74VHCT540A is an advanced high speed CMOS inverter eight-bus buffer manufactured using silicon gate CMOS technology. It achieves high speeds similar to equivalent bipolar Schottky TTL while maintaining CMOS low power consumption. The input and output of the MC74VHCT540A are located on opposite sides of the package and have two and type active low output enablement.
The MC34163 series are monolithic power switching regulators optimized for dc−to−dc converter applications. The combination of features in this series enables the system designer to directly implement step−up, step−down, and voltage−inverting converters with a minimum number of external components. Potential applications include cost-sensitive consumer products as well as equipment in the automotive, computer and industrial markets.
The MC100EP809 is a low skew 2:1:9 differential clock driver, designed with clock distribution in mind, accepting two clock sources into an input multiplexer. The part is designed for use in low voltage applications which require a large number of outputs to drive precisely aligned low skew signals to their destination. The two clock inputs are one differential HSTL and one differential LVPECL. Both input pairs can accept LVDS levels.