miClockManagement Improve Performance Reliability in Data Center - 应用 | 黑森尔电子
联系我们
SalesDept@heisener.com +86-755-83210559-834
Language Translation

* Please refer to the English Version as our Official Version.

miClockManagement Improve Performance Reliability in Data Center

发表于 十一月 7, 2018

Microsemi’s family of frequency conversion products lowers bill of material costs, reduces board space requirements and simplifies design complexity by replacing multiple components including oscillators and discrete PLLs required to implement frequency conversion. These flexible high performance devices create very low-jitter clocks (sub 500 fs) from an input clock and create several different frequencies utilizing multiple output dividers to support multi-rate applications.

Microsemi's miClockManagement portfolio provides ultra low-jitter devices for clock synthesis, frequency conversion, jitter attenuation, and fanout buffers to reduce clock-tree BOM and board space requirements, improve performance reliability, and simplify design.

Easy to Design

Pin-selectable custom confi gurations (up to 4 for miJitterAtten products and up to 8 for miSmartBuffer and miClockSynth products)

Create factory pre-programmed devices using miClockDesigner™

Applications

Clocks for NPUs, FPGAs, CDRs, high-speed ADCs and DACs, PCIe interface devices, Ethernet switches, and PHYs

Timing generation for data center, enterprise, storage servers, ethernet, optical, networking, wireless, and broadcast video applications

关键元件

零件编号 描述
MAX24610EXG+
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC CLK MULT/ATTENUATOR 10OUT RFQ
MAX24605EXG+
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC CLK MULT/ATTENUATOR 5OUT RFQ
MAX24510EXG+
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC CLK MULT 10-OUT EEPROM RFQ
MAX24505EXG+
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC CLK MULT 5-OUT EEPROM RFQ
MAX24410EXG+
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC CLK MULT 10-OUTPUT RFQ
MAX24405EXG+
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC CLK MULT 5-OUTPUT RFQ
ZL30245LFF7
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, 6-INPUT, 6-OUTPUT ANY-RATE CLOCK RFQ
ZL30253LDF1
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC JITTER ATTENUATOR 3I/O 32QFN RFQ
ZL30252LDF1
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC JITTER ATTENUATOR 3I/O 32QFN RFQ
ZL30251LDF1
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC CLK GEN QFN RFQ
ZL30251LDG1PROG
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC CLK GEN QFN RFQ
ZL30254LDG1
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC JITTER ATTENUATOR 3I/O 32QFN RFQ
ZL30254LDF1
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC JITTER ATTENUATOR 3I/O 32QFN RFQ
ZL30250LDF1
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC CLK GEN QFN RFQ
ZL30253LDG1
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC JITTER ATTENUATOR 3I/O 32QFN RFQ
ZL30252LDG1
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC JITTER ATTENUATOR 3I/O 32QFN RFQ
ZL30245LFG7
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, 6-INPUT, 6-OUTPUT ANY-RATE CLOCK RFQ
ZL30251LDG1
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC CLK GEN QFN RFQ
ZL30250LDG1
Microsemi Corporation
时钟/计时 - 时钟发生器,PLL,频率合成器, IC CLK GEN QFN RFQ
ZL30159GGG20037
Microsemi Corporation
时钟/计时 - 专用, IC CLK TRANSLATOR 2CH 64LBGA RFQ
ZL30255LFG7
Microsemi Corporation
时钟/计时 - 专用, DUAL-CHANNEL ANY-TO-ANY CLOCK MU RFQ
ZL30255LFF7
Microsemi Corporation
时钟/计时 - 专用, DUAL-CHANNEL ANY-TO-ANY CLOCK MU RFQ

Related Articles

  • How to maximize the efficiency of SiC traction inverter by real-time variable grid drive strength?

    Traction inverters are the main battery drain components in electric vehicles (EVs), with power levels up to 150kW or higher. The efficiency and performance of traction inverter directly affect the driving range of electric vehicle after a single charge. Therefore, in order to build the next generation of traction inverter systems, silicon carbide (SiC) field effect transistor (FET) is widely used in the industry to achieve higher reliability, efficiency and power density.

  • Do you know the 8 application circuits of operational amplifiers?

    Do you know the 8 application circuits of operational amplifiers?

  • How do you configure an op-amp in a typical gain control circuit?

    This technical presentation requires an understanding of how to configure an operational amplifier in a typical gain control circuit. The applications of linear and nonlinear digital potentiometers are discussed. This article gives an overview of the basic techniques required to convert audio and other potentiometer/op amp applications from conventional mechanical potentiometers to solid state potentiometers

  • Simple way to limit current using integrated MOSFeTs

    The current in an electronic circuit usually has to be limited. In USB ports, for example, excessive current must be prevented to provide reliable protection for the circuit. Also in the power bank, the battery must be prevented from discharging. Too high discharge current results in too large voltage drop of the battery and insufficient supply voltage of downstream devices

  • Three excellent ways to reduce audible noise in motion control applications

    Using advanced real-time control technologies such as motor control circuits with higher power density, higher integration and more efficient systems, better acoustic performance of the system can be achieved

  • How to control brushless DC motor?

    Brushless direct current (BLDC) motors have been widely used in household appliances, industrial equipment and automobiles. While brushless DC motors offer a more reliable and maintainable alternative to traditional brushless motors, they require more sophisticated electronics to drive them

  • How to achieve precise motion control in industrial actuators

    How to achieve precise motion control in industrial actuators

  • Summary of PCB design strategy for GaN drivers

    The NCP51820 is a 650 V, high-speed, half-bridge driver capable of driving gallium nitride (" GaN ") power switches at dV/dt rates up to 200 V/ns. The full performance advantages of high voltage, high frequency and fast dV/dt edge rate switches can only be realized if the printed circuit board (PCB) can be properly designed to support this power switch. This paper will briefly introduce NCP51820 and the key points of PCB design of high performance GaN half bridge grid driver circuit using NCP51820