STMicroelectronics has released two STPOWER power modules with built-in 1200V silicon carbide (SiC) MOSFETs in mainstream configurations. Both modules are packaged in STMicroelectronics' ACEPACK 2 technology for high power density and easy installation. The MOSFETs in both modules use ST's second-generation SiC technology, with an excellent RDS(on) x die area figure of merit, ensuring that the switches can handle high currents with very low power losses.
STMicroelectronics' EVLVIPGAN50PD 45 W USB Type-C® Power Delivery 3.0 Adapter is an isolated power supply based on the VIPERGAN50, the VIPER series of offline high voltage converters featuring 650 V HEMT power GaN transistors designed for quasi-resonant flyback conversion controller design capable of delivering up to 45 W of output power over a wide range
STMicroelectronics' STEVAL-MKI212V1 adapter board is designed to help evaluate MEMS devices in the ASM330LHHX product family. This board provides an efficient solution for rapid system prototyping and device evaluation directly in the user's own application.
The IPS1025H, IPS1025H-32 and IPS1025HF of STMicroelectronics are monolithic architectures with M0T5 VIPower technology in PowerSSOS-24 packaging. These ics are single high-voltage side switching devices that can drive capacitive, resistive, or inductive loads (high-voltage side switches) grounded on one side. The operating voltage is recommended to be in the range of 8 V to 60 V, but the breakdown voltage on the power pin can reach 65 V
The TSB582 from STMicroelectronics is a high-voltage and high-current capability unit gain stabilized dual operational amplifier with internal protection against overheating and current overload conditions and enhanced ESD and RF noise immunity. Typically, up to 200 mA of current is output per channel to drive low resistance inductive loads such as Angle rotary transformers, line output cables, and piezoelectric actuators
STMicroelectronics has introduced the IPS1025HF fast-start high-side power switch targeted for safety systems requiring extremely short power-on delay times. The on-off response time of the IPS1025HF is still less than 60µs, ensuring that the safety protection system achieves the specified Safety Integrity Level (SIL). Supporting wide-voltage input from 8.65V to 60V, with a maximum withstand voltage of 65V on the input pins, this compact device can withstand harsh conditions in industrial applications
STMicroelectronics has introduced its new generation FlightSense™ Time-of-flight (ToF) multi-zone sensor. The product, together with a set of practical software algorithms, constitutes a comprehensive solution for user detection, gesture recognition and intrusion alarm designed for the PC market.
STMicroelectronics has released the IPS1025HF fast-starting high-side power switch for employment in safety systems requiring minimal power-on delay time.
ST's TSB582 dual high-output amplifier simplifies driving circuits for inductive and low-resistive loads such as industrial motors, valves, resolvers, and automotive electric steering systems, and automatic parking.
STMicroelectronics's ST-One is the world's first digital controller with an Arm® Cortex®-M0+ kernel, an offline programmable controller with synchronous rectifier capabilities, and a USB-powered (PD) PHY embedded in a single package. The system is specifically designed to control ZVS non-complementary active clamp flyback converters to create high-power density battery chargers and adapters with USB-PD interfaces.
The STMicroelectronics AIS25BA MEMS digital output motion sensor is an ultra-low noise, low latency, wide bandwidth three-axis digital accelerometer with a dedicated time division multiplexing interface. The device is designed to address automotive non-safety applications, and the motion sensor is housed in a compact LGA package that is guaranteed to operate over a temperature range of -40°C to +125°C. The unit is AEC-Q100 qualified and can be used in automotive applications.
Dalian Grande Holdings, a leading semiconductor component distributor dedicated to the Asia-Pacific market, announced that its Youshan unit has launched three-phase shunt meter solutions based on stmicroelectronics (ST) STPMS2, STISO621 and STM32F413RH chips.
STMicroelectronics, the world's leading semiconductor company serving multiple electronic applications, has announced version 4.20 of TouchGFX, a graphical user interface design software for STM32 microcontrollers. STM32 user interface design environment adds screen rotation and texture mapping, supports powerful Neochrom graphics accelerator
Ststmicroelectronics's STEVAL-ASTRA1B Multi-connection evaluation platform provides an entire ecosystem for asset tracking system designers to develop fully functional proof-of-concept prototypes. The battery powered assessment kit is compact in size and provides firmware to simplify the development process for target applications such as livestock monitoring, fleet management and logistics.
Stmicroelectronics (ST) has released STM32Cube.AI version 7.2.0, the microcontroller manufacturer's first artificial intelligence (AI) development tool that supports ultra-efficient deep quantization neural networks.
Stmicro LD56020 200mA low voltage drop regulator uses 1.1V to 5.5V power supply, low output noise, suitable for applications with high stability and battery life requirements.
STMicroelectronics has released two reference designs using the STSPIN32 motor control system-in-package (SiP) to simplify the development of industrial or appliance compressor motor drivers. The average energy efficiency of both reference designs is greater than 96.5%.
ST's VNF1048F automotive-grade high-side switch controller integrates enhanced system protection diagnostics and ST's I2-t silicon fuse protection technology.
