Toshiba Electronics Europe has announced a new, high-capacity addition to its MC04 Series HDDs. The new 6TB version of the MC04 Series of enterprise high-capacity HDDs is designed for bulk storage systems and servers supporting cloud-based applications and scale-out workloads.
Latest from Microchip comes news of the expansion of its human interface solutions portfolio with the MTCH6303, an innovative, turnkey projected-capacitive touch controller for touch pads and screens. Touch sensors with up to 1000 nodes and diagonals of up to 10-inch are supported.
Laird’s CoolZorb 400 Hybrid Thermal / EMI Absorber – a hybrid absorber/thermal management material used for EMI mitigation. The material is used like a traditional thermal interface material between heat sources like an IC and heat sink or other heat transfer device or metal chassis.
InfoVue high / low-temperature LCDs which provide a number of key benefits including reliable performance in a wider range of extreme temperatures, enhanced visual display quality, and significant technology cost and energy savings.
Avago’s 5MBd digital optocouplers. The range is primarily designed around lower power consumption and lower supply voltage applications such as motor control or computer peripheral interface. The ACPL-x2xL devices draw less than 10mW without compromising signal isolation capability or integrity.
Hirose Electric PS3F hybrid low-profile, front-access connectors allow mating and un-mating of power and signal cables from the plug-in side.
New from Texas Instruments (TI) the ATL431 and ATL432 are three-terminal adjustable shunt regulators, with specified thermal stability over applicable automotive, commercial, and industrial temperature ranges.
Designed for harsh environments, Amphenol new Ethernet Category 6 Socapex RJField interconnects feature a data rate of 1Gb/s under 250Mhz Ethernet networks along with great protection from shocks, dust and fluids.
Murata Power Solutions’ NMUSB202MC powered dual-port USB data isolator is suitable for both industrial and medical applications. The surface-mount module provides dual-port USB data isolation from a single upstream port with full power (500mA) available from each downstream port.
Integrated Device Technology (IDT) has announced the expansion of its VersaClock 5 family of programmable clock generators with new devices that simplify the creation of PCI Express clocks for a design while providing the flexible outputs for which VersaClock is known.
Linear Technology has unveiled the LTM4676A, a new dual 13A or single 26A, current shareable up to 100A µModule (micro module) step-down DC-DC regulator with PMBus serial digital interface. The digital interface enables system designers and remote operators to command and supervise a system’s power condition and consumption.
The new RCOB LED driver series from Recom has specifically been developed to meet the requirements of COB (chip-on-board) LEDs. The driver series includes 11 models with output voltages between 25 and 44VDC and constant output currents of 350 to 1050mA, thus offering a suitable driver for virtually any application.
Rohm’s BH6260MWX SPST USB switch IC. The device includes a single-pole single-throw (SPST) analog switch and an inverter analog switch in a single package. Analog SW0 and SW1 can pass a USB 2.0 high-speed signal while analog SW2 and SW3 pass a UART signal.
Panasonic Automotive & Industrial Systems has introduced a broad range of high-precision, miniature semiconductor pressure sensors. They are available with built-in amplification and temperature compensation cicuitry (PS-A units). Precision sensors without amplifier and open wheatstone measurement bridge are also available and in ultra-miniaturised sizes (PS).
Swissbit has launched its next generation X-60m Series mSATA solid-state drive (SSD) product family. Compliant with the latest SATA III (6.0 Gb/s) interface specification, they deliver leading edge performance and reliability in the most demanding industrial, network and communication and automotive sectors.
The Cypress CY5672 PRoC BLE Remote Control Reference Design Kit (RDK) which provides an implementation of a Bluetooth LE (BLE), or Bluetooth Smart, remote control using the PRoC BLE single-chip solution. The RDK integrates Cypress’s capacitive touch sensing, an ARM CortexTM-M0 CPU core, Bluetooth 4.1-compliant Bluetooth Smart connectivity, and a balun to minimize external components.
Texas Instruments (TI) has introduced an integrated gate driver that offers adjustable gate drive settings with the flexibility to drive a wide range of external field-effect transistors (FETs), supporting multiple motors, speeds or varying loads.
Honeywell’s SS490 Series miniature ratiometric linear (MRL) sensors are small, versatile linear Hall effect devices operated by the magnetic field from a permanent magnet or an electro-magnet. The ratiometric output voltage is set by the supply voltage and varies in proportion to the strength of the magnetic field.