FCI's Minitek Pwr Hybrid 3mm and 4.2mm connectors. Compared to traditional power connectors, the new Hybrid series benefits from an improved flexible modular design. This ensures that the number and location of power and signaling contacts can be highly configured in many requirements and applications.
The Minitek Pwr Hybrid 3.0 connector is designed for power and signal applications with a current rating of up to 5A per circuit. The device can be used for dual banks and 2 to 24 power circuits, and 2 to 12 signals for wire-to-board applications. Crimp, plug-in socket contacts for terminating AWG 20-30 wires. The socket housing allows wire-to-board configuration. Crimping and disassembly tools are available for wiring harness assembly. The vertical header connectors installed on the board support wire-to-board interconnection. Wave soldering joints can be used in through-hole configurations.
The Minitek Pwr Hybrid 4.2 connector is designed for power and signal applications with a current rating of up to 9A per circuit. They are suitable for dual banks and 2 to 24 power circuits, and 2 to 12 signals for wire-to-board applications. Crimp, plug-in socket contacts for terminating AWG 16-30 wires. The socket housing allows wire-to-board configuration. Crimping and disassembly tools are available for wiring harness assembly. The vertical header connectors installed on the board support wire-to-board interconnection. Wave soldering joints can be used in through-hole configurations.
