Onsemi has introduced three silicon carborundum based power modules with die-casting die technology for on-board charging and high-voltage DCDC conversion in all types of electric vehicles. The APM32 series is an industry-first combination of SiC technology and die casting package to improve energy efficiency and shorten xEV charging time. It is designed for high-power vehicle chargers from 11 kW to 22 kW (" OBC ").
PD fast charging power source solutions for ON Semiconductor NCP1623 and NCP1343 products and GaN System GS-065-011-2-L power transistors.
ON Semiconductor's NCP1623 Critical Conduction Mode (CrM) Power Factor Controller is designed to drive a PFC boost stage. Based on an innovative Valley Synchronous Frequency Foldback (VSFF) method, the NCP1623 operates in Critical Conduction Mode (CrM) until the power drops below a threshold level. The NCP1623A model features follower boost capability, which greatly improves low line efficiency. The device is also available in a SOIC-8 package and features an ultra-low power mode controlled externally by a disable pin.
The Onsemi NCS2023x and NCV2023x operational amplifiers feature a wide supply voltage range of 2.7V to 36.0V and input offset voltages as low as ± 0.95mV. The NCS2023x and NCV2023x operational amplifiers are available in single-channel, dual-channel, and four-channel configurations.
In order to improve the operating efficiency of the motor and reduce energy loss, Dalian World Peace has launched a 4KW 650V industrial motor drive solution based on onsemi products, which can provide an ideal choice for designing high-efficiency and low-power industrial motor drives. The NFAM5065L4B intelligent power module used in this solution provides a full-featured, high-performance inverter output platform for AC induction, DC brushless and permanent magnet synchronous motors
The United Nations General Assembly announced that its subsidiary Youshang launched a 100W PD power adapter solution based on the onsemi NCP1343 chip. Offers designers innovative features with high-performance controllers and drivers that significantly reduce the bill of material (BOM) content of energy-efficient AC-DC power supplies, especially in the load range above 100W, including smartphone, laptop adapters .
Onsemi's NCL31010 now integrates two components into a single package, making a single luminaire part of a fully connected and managed lighting system and enabling many other functions.
ON Semiconductor Announced the launch of a new 10BASE-T1S Ethernet controller designed to provide reliable multipoint communication for industrial environments. NCN26010 simplifies installation, achieves greater data throughput, and implements more than 40 nodes on a twisted pair, more than five times the number of nodes required by the IEEE 802.3CG standard, reducing installation costs and setup complexity.
Onsemi is one of the few suppliers of end-to-end SiC solutions from substrate to module. Onsemi is a leading supplier of intelligent power solutions with a strong history in the SiC field. Its innovative VE TracTM Direct SiC and VE-TRACTM B2 SiC solutions use stable and reliable planar SiC technology, combined with sintering technology and die casting packaging, to help designers address these challenges,
ON Semiconductor launched the world's first TOLL packaged 650 V SiC MOSFET. New device shrinks package size by 60%, enhances performance and reduces losses
ON Semiconductor is in a leading position in the SiC field and is one of the few suppliers in the world that can provide end-to-end SiC solutions from substrate to module, providing UPS with high energy efficiency, high performance SiC MOSFETs, SiC diodes, All SiC modules and hybrid SiC modules, together with ON Semiconductor's SiC-optimized gate drivers, sensing, isolation and protection ICs and other peripheral devices and application support, help designers to make the difference between performance, energy efficiency, size, cost, and control difficulty. Find the best trade-offs.
The NCN5140S simplifies access control and control panel development and is the industry's first KNX Institute certified system-level package (SiP). The NCN5140S integrates all key and verifiable components of KNX devices in a single package, including a digital KNX transceiver, a 32-bit Arm® Cortex®-M0+ microcontroller with pre-certified software stack, and a system power DC-DC converter. NCN5140S 'high integration greatly reduces material costs, allowing manufacturers to develop very thin and modern designs (total thickness & LT; 5 mm).
Onsemi has introduced two complete system solutions that support the most widely used building automation network protocols - PoE and KNX. NCN5140S is the first SiP certified by KNX Society to simplify access and control panel development. The company also released a complete Ethernet-powered lighting solution. NCL31010 is unique to any other device on the market in that it integrates smart LED drivers and PoE interfaces into one package.
Onsemi has announced three products for USB power delivery designs. The NCP1345 is a quasi-resonant flyback controller for high performance offline power and USB Type-C PD quick charging applications. The NCP1623 is a small Boost PFC controller rated up to 300W for USB PD quick charging adapters and computing power supplies. The NCP4307 is a high-performance driver designed for use with synchronous rectifier MOSFEts in a variety of high-performance switching mode power topologies.
According to the needs of chips, market research has been carried out on some brands to meet the needs of users to understand the chip market, so as to quickly stock up
Onsemi offers the latest mixed signal controllers dedicated to bridging TP PFC topologies and NCP1681 for ultra high density offline power supplies. It can be configured to operate at fixed frequency CCM or multi-mode operation, where the controller naturally switches between CCM and CrM for optimal performance across power levels. The new high-power TP PFC controller combines established control algorithms with novel elements to provide high performance and low cost TP PFC solutions
Onsemi has introduced a secure new RSL15 wireless MCU with the lowest power consumption in the industry. The device is eEMBC-certified to verify energy efficiency while maintaining its state of the art power consumption, the device employs ArmTrustZone technology to establish trusted device roots and Arm Cryptocell-312 technology to shield code and data from authenticity, integrity and confidentiality.
Anson Semiconductor has added a 16-megapixel sensor to the XGS family, the XGS 16000. The device has the same construction and footprint as other XGS CMOS image sensors and supports 65fps full resolution readings. The device is designed with a unique 1:1 square aspect ratio and ensures optimal light sensitivity. The sensor is compatible with industry standard camera formats of 29mm2, using commercial c-mount lenses
