The Cincons CFM series, CFM50S, is a new open power supply offering 50W stabilized power with a universal input range of 90-264VAC and a compact size of 2 "x 3". Delivers up to 89% efficiency and a wide operating temperature range of -30C to +80C, can be used at altitudes up to 5000m, and provides low no-load input power consumption of less than 150mW
The m5Stack K034 Tough ESP32 IoT Development Board Kit is an industrial-grade programmable embedded controller equipped with a dual-core low-power Xtensa 32-bit LX6 microprocessor with a clock frequency up to 240MHz. Ideal for industrial control, intelligent building, outdoor node data acquisition, and other applications.
The component combines the automotive industry standard FAKRA connector with the popular SMA connector to accommodate applications such as antennas, RFID and ADAS. The new 50-ohm assembly has a fastenable FAKRA interface on one end and a threaded SMA interface on the other. The cable assembly is available in several standard lengths on flexible RG-58 and RG-174 cables and provides reliable electrical performance up to 3GHz
Mouser released a new ebook in partnership with Maxim Integrated(now part of the Analog Device). The new ebook provides detailed insights into meeting these performance requirements while building lighter and smaller devices. The high-speed comparator provides a typical propagation delay of 280ps and overdrive dispersion of as low as 25ps, ideal for ToF, distance measurement applications.
GTK has added a new high-resolution 10.1 "TFT display to its large portfolio, offering a low-profile, compact design and adopting a MIPI interface that generates high-speed signals. The panel displays WUXGA 1920 x 1200 resolution and offers an integrated 34-pin ZIF connector located on the back of the device.
Rohde & Schwarz has added its R&S Spectrum Rider FPH series, offering a new base model for measuring frequencies up to 44GHz. The new higher frequency model allows the device to perform a wider range of measurement tasks. With high sensitivity of -160dbm, measurement accuracy between 10MHz and 3GHz is typically 0.5dB, providing class leading RF performance. The 44GHz model weighs just 3.2kg and is optimized for mobile applications
Provertha produces a compact, fully shielded distribution system for the M8/M12 cable. It simplifies the connection between the equipment and the wired network and saves the cost. The solution is a flexible adaptable plug and play system that optimizes the wiring for the specific situation of the application, and the plug connection on the branch box (branch box) can also be configured with a rotatable lock compared to a traditional I/O branch box (branch box)
Renesas Electronics has released what it claims is the industry's first industrial temperature DDR5 (5RCD0148H) and DDR4 (4RCD0232K) Registered Clock driver (RCD). The new industrial temperature RCD supports temperatures as low as -400 ° C and as high as 1050 ° C, while commercial temperature devices typically operate between 0 ° C and 700 ° C. The device offers 2X channel speed improvements, low latency and excellent power management, allowing DDR5 industrial temperature memory and memory downtime applications.
EC1001P capacitors offer ultra-low thickness (150µm, not including gaskets), allowing advanced assembly under strict height restrictions (processor packs, BGA floor, embedded packs, etc.). EC1001P capacitors offer ultra-low thickness (150µm, not including gaskets), allowing advanced assembly under strict height restrictions (processor packs, BGA floor, embedded packs, etc.).
ShowMeCables has released its new line of fiber optic transceivers that are MSA-compatible and compatible with most switch and router platforms. The form factors provided are gic, SFP, SFP+ and XFP, with range selection ranging from 220 m to 120 km, and three emission wavelengths available - 850nm, 1310nm and 1550nm
The STMICROELECTRONICS LPS22DF MEMS nanopressure sensor is an ultra-compact piezoresistive absolute pressure sensor. The device consists of a sensing element and an IC interface that communicates via I2C, MIPI I3CSM or SPI interface from the sensing element to the application. It also provides a complete mold, hole LGA package, Ensure operating in the temperature range of -40℃ to +85℃
The Vishay Sfernice RAMK027 High Precision Position sensor is currently supplied by TTI Europe. With an outer diameter of 27mm, the encoder offers functionality comparable to that of larger devices, which use advanced electronic architecture to achieve 13-bit accuracy and 17-bit resolution. Test voltage up to 200V/m, EMC test according to RE101, RE102, RS101, RS103.
Elma Electronics' new JetSYS-5320 addresses the growing data processing needs of very rugged and mobile embedded computing applications by easily handling data-intensive computing tasks. The new equipment enhances visual intelligence in transportation and defense applications. At the heart of the device is NVIDIA Jetson TX2i SoM, which allows real-time AI reasoning and DL/ML capabilities. The rugged system also offers HD-SDI, Gigabit Ethernet with PoE, USB 3.0 port for video capture and miniPCIe expansion slots
New Yorker Electronics now offers the new Vishay Sfernice P11H Series modular high torque panel potentiometers that provide high torque for smooth operation over the entire life of the potentiometer. 1kOhm, 4.7kOhm, 10kOhm, 47kOhm and 100kOhm are available at ±10% or ±20% tolerances and resistances. Operating temperature range from -55C to +125C. The products are certified by CECC 41000 and IEC 60393-1, have a seal class of IP64 and a service life of more than 50,000 cycles
Manufactured by CONEC Elektronische Bauelemente GmbH, offering contact pins with a diameter of 0.8mm, the very compact range M8x1 D coded circular connectors are fully optimized for industrial automation applications, suitable for a variety of Ethernet-based communication applications, Electrical characteristics include 50VAC and 60VDC operating voltages and rated current up to 4A at 40C
Radio waves has released a new line of 8-port CBRS sector antennas, the new family of CBRS sector antennas offering gains of 16dBi to 18dBi and a 65 degree beam width. These models are symmetrical in both polarizations to minimize chain imbalance. The new fan antennas also offer 8 x 8 MIMO operation, 8 +/-45 tilt-polarized ports, built-in N female connectors.
ProTek Devices has launched a steering diode /TVS array, the new device - PLR0504FN5 - compatible with IEC standard 61000-4-2 (ESD): air +/ -15kV and contact +/ -8kV, with 61000-4-4 (EFT): 40A, 5/50ns, and 61000-4-5(surge): 3A-8/20 microseconds. Also provides ESD protection. 25kV four-data cable. The device is also RoHS and REACH compliant and weighs approximately 5 mg
PREMO has released its new 11kW 3DPower solution, a full bridge LLC transformer 150µH + resonant choke 25µH incorporated in a single unit. This innovation provides up to 40-50% volume reduction compared to current discrete industrial solutions for the same power management. An aluminum radiator is provided as a direct thermal interface to the cold plate
