The MPM38222 is a dual-channel DC/DC module. The module includes a monolithic, step-down, switch-mode converter with built-in, internal power MOSFETs and inductors. The MPM38222 is designed to simplify power system design and provide ease of use.
Both the MP6540 and MP6540A are 3-phase brushless DC motor drivers that integrate three half-bridges and are composed of six n-channel power MOSFETs, driver circuits, gate drive power supplies and current sampling amplifiers.
The LT1301 is a micropower step-up DC/DC converter that utilizes Burst Mode operation. The device can deliver 5V or 12V from a two-cell battery input. It features programmable 5V or 12V output via a logic-controlled input, noload quiescent current of 120µA and a shutdown pin which reduces supply current to 10µA.
NXP Semiconductors offers the NXH3675 high-quality audio streaming solution, a highly integrated, single-chip 2.4GHz transceiver certified to the Bluetooth 5.3 LE audio standard. The device allows developers to produce innovative products in the Bluetooth audio world with elements such as high-quality audio transmission, broadcasting capabilities, and multiple audio streams and data channels. With its optimised audio streaming protocol, the device provides ultra-low latency with ultra-low power consumption for advanced use cases.
TDK has developed a new TFM-BLE series thin film power supply circuit inductor. TDK integrates the film technology developed in the magnetic head business into the manufacturing of this series of inductors, and uses TDK's characteristic conductor forming technology to use magnetic metal materials with high saturation magnetic flux density as core materials, so as to meet the DC bias characteristics required by inductors in power circuits, and optimizes space constrained applications such as smart phone power circuits
The ISL60002 FGA voltage references are very high precision analog voltage references fabricated using the Renesas proprietary Floating Gate Analog (FGA) technology and feature low supp
The 17529 is a monolithic dual H-Bridge power IC ideal for portable electronic applications containing bipolar step motors and/or brush DC-motors (e.g., cameras and disk drive head positioners).
The OPA330 series of CMOS operational amplifiers offer precision performance at a very competitive price. These devices are members of the Zero-Drift family of amplifiers which use a proprietary autocalibration technique to simultaneously provide low offset voltage (50-μV maximum) and near-zero drift over time and temperature at only 35 μA (maximum) of quiescent current.
The EL7457 is a high speed, non-inverting, quad CMOS driver. It is capable of running at clock rates up to 40MHz and features 2A peak drive capability and a nominal on-resistance of just 3. The EL7457 is ideal for driving highly capacitive loads, such as storage and vertical clocks in CCD applications. It is also well suited to ATE pin driving, level-shifting, and clock-driving applications.
The DAC7558 is a 12-bit, eight-way, voltage-output DAC with excellent linearity and monotony. Its proprietary architecture minimizes unnecessary transients such as code-to-code failures and channy-to-channel crosstalk. The low-power DAC7558 works from a single 2.7v to 5.5v power supply. Available in a 32 pin QFN package, suitable for range from -40°C to 105°C
ROHM has developed a small and efficient 20V voltage Nch MOSFET*1 "RA1C030LD", which is ideal for switching applications of wearable devices, wireless headphones and other listening devices, as well as smart phones and other thin and small devices.
The EL1883 video synchronous separator is manufactured using Elantec's high-performance analog CMOS process. The device extracts synchronous timing information from standard and non-standard video inputs and Macrovision pulses. It offers composite synchronization, vertical synchronization, burst/back porch timing, and horizontal output. Fixed 70mV Sync hint slice provides sync edge detection when the video input level is between 0.5VP-P and 2VP-P (sync hint amplitude 143mV to 572mV).
Infineon Technologies has announced the launch of the new XENSIV TLE4971 series of magnetic current sensors to further enrich its automotive current sensor portfolio. The series of magnetic current sensors can also be used in a variety of industrial applications, such as electric vehicle DC chargers, industrial drivers, servo drivers, photovoltaic inverters, etc.
Melexis announced the release of a versatile programmable 3-axis latch and switch chip MLX92352 for relative position and speed sensing applications. The device has a flexible magnetic design that supports dual output regardless of spacing, and the output can be set to speed, pulse or direction. With its superior EMC and ESD performance, this PCB-free device saves space and total module costs for automotive and industrial applications.
The MAX20079 is a small, automotive grade synchronous buck converter with integrated high-side and low-side switches. The device is designed to deliver up to 3.5A with input voltages from +3V to +36V while using only 3.5μA quiescent current at no load.
Diode AL5871Q is an automotive class single-channel linear LED driver with PWM and analog dimming control. The AL5871Q can be driven up to 750mA and the LED current can be set via a low-power reference resistor connected to the REF pin.The AL5871Q regulates LED current accurate to ±4%, with excellent PWM and analog dimming performance. The AL5871Q enters standby mode to save power if no PWM signal is detected.
The Qorvo QPF4658 Wi-Fi 6E front-end module is an integrated front-end module (FEM) designed for Wi-Fi 6 and 6E (802.11ax) systems. The QPF4658 integrates a 6-7 GHZ power amplifier (PA), a single-pole double-throw switch (SP2T) and a bypassable low noise amplifier (LNA) into a single device.
