Raystar's REX128128D COG OLED module adds a rotary switch module, which is now available from Rutronik
Isabellenhutte has created a powerful low-ohmic buffering shunt, THE SMT-V, with extremely high pulse power ratings. The design and materials of the new SMT-V are better able to withstand pulsed loads. High pulse power ratings can be achieved by using NOVENTIN, an internal resistance material. The device can absorb 2.5J pulse energy with a pulse duration of 0.1 s and a terminal temperature of 120℃. Several 50 pulses can be absorbed with corresponding gap time during its life cycle
Mouser currently holds Skyworks Solutions' Sky68031-11 Multi-band RF Iot front-end module. The MODULE's PA load line has been optimized to improve efficiency while achieving 3GPP ACLR and emission mask specifications with LTE up to 6RB.
Advantech Has launched the AIR-020 series. Offers a small footprint of 139mm x 110mm x 44.5mm(5.47 "x 4.33" x 1.75 "). It is powered by NVIDIA Xavier NX SoM, Jetson TX2 NX's AIR-020T, and Jetson Nano's Air-020N to meet different AI applications and performance needs. The compact design is only 139mm x 110mm x 44.5mm(5.47 "x 4.33" x 1.75 "). Perfect for edge AI applications,
Renesas Electronics has expanded its mmWave LNAs and Tx BFC product portfolio with the introduction of three new dual-beam active beamforming chips. These new integrated circuits offer first-class power consumption, noise, compact size, and simple integration. The new F61xx Rx device is believed to be the first commercial product to offer dual-beam capability for simultaneous multi-satellite, multi-orbit operations over the full Ku and Ka satellite communications bands. And the new device offers lower power consumption, increased on-chip beam memory
Renesas Electronics has developed two 2.4ghz rf transceiver technologies that support the Bluetooth LE low-power, near-field communication standard. There are also two new technologies to meet these requirements: a matching circuit technique and another signal correction technique for locally generated reference signals. With these new technologies, it reduces the circuit area (including power supply) to 0.84mm2, enabling a smaller installation area and better power efficiency.
Melexis has introduced a new ToF 3D camera, the MLX75026, which is equipped with a fully integrated Infrared Band-pass (IRBP) filter. By incorporating IRBP, it eliminates the need to incorporate a separate infrared filter in the lens or sensor assembly. The device is targeted at automotive applications, including safety applications related to driver monitoring, in-car monitoring, gesture control, and airbag deployment
Renesas Electronics has expanded its cloud environment lab to simplify the configuration and testing process and speed time-to-market. On-cloud LABS allow customers to remotely access, configure, monitor, test and measure solutions 24/7 in a full-fledged cloud-connected lab. The company has also added 14 popular assessment boards to its Cloud Environment lab
RDS now offers an 11.6-inch Tianma TFT display module TM116VDSP02, and offers full HD (1920 x 1080 pixels) resolution, 16:9 aspect ratio, high brightness levels, and excellent optical performance. Also provides a common, capable display solution for a wide range of display applications, especially those where high levels of ambient or outdoor light may be present
Vishay Intertechnology has introduced a new line of high power thin-film packaged chip resistors qualified for the AEC-Q200. The device has a resistance range of 10-ohm to 30.1kOhm, low noise less than -30dB, low voltage coefficient < 0.1ppm/V, working voltage 200V. And meet roHS standards. Widely used in automotive power supplies, braking systems, car chargers, motor deflection circuits and industrial testing and measuring equipment
Mouser is helping today's design engineers deliver insightful content around exciting new sensor technologies. With the rapid development of the Internet of Things and intelligently connected devices, manufacturers have made significant advances in sensor technology and performance, producing smaller, cheaper and better performing products. To achieve the latest design solutions
Siretta's QUARTZ GOLD Router, currently offered by RS Components, is a high-performance industrial router that offers a rugged design packaged in a small metal case, making it ideal for deployment in industrial embedded applications. The device comes as standard, With a single SIM card slot, dual port Gigabit Ethernet capabilities and optional GNSS capabilities, it is ideal for asset tracking or access management applications
A few months after the first launch of the Raspberry Pi RP2040 microcontroller, Sfera Labs has released what it claims is the first industrial product based on the new chip. The devices include the RP2040, the first high performance microcontroller chip created by Raspberry PI and targeted at the industrial and amateur markets. With a wide range of 12-24V power input and power relay output, support industry standard 0-10V/4-20mA analog input, 0-10V analog output, digital INPUT/output line, RS-485 serial interface.
Infineon Technologies has introduced a simple backpack with automotive performance 2B EDT2, a flexible, retractable half-bridge power module. Another unique feature of this module is the plug-and-play approach, which simplifies module integration.
Renesas Electronics Corporation has expanded its environmental sensor portfolio with the launch of its first thermothermopile based detector family with integrated optical filters for optical (NDIR) CO2 sensors. The new detectors also provide fast response times to ensure high accuracy in mission-critical applications. And the new thermopile based detector complements the company's current lineup of environmental sensors for air quality monitoring.
A common need for packaging equipment lines is the requirement for frequent access to adjust, correct, re-set or reprogramme. This is a situation where the ingenious Elesa CFSW combined hinge and electrical cut-off switch provides a safe and straightforward solution.The device is double insulated and approved by IMQ CA02.04800 in compliance with EN 60947-1/2007 + EN 60947-5-1:2004 + A1/2009.
Intepro Systems offers a full suite of test services to the battery industry, including up to 2MW of batteries and battery testers and battery simulators for research and OEM applications in the electric vehicle, aerospace and other industries. Its integrated test system uses the latest regeneration technology and products available include a bi-directional DC power supply and a 1.9MW automatic ranging source
TDK has added a new three-phase AC input model to the TDK-Lambda DRB series of low-cost DIN rail mounting power supplies. DRB three-phase series is also an ideal product for a wide range of applications. It also accepts a wide range of inputs from 350 to 575VAC, with isolation of input to output at 3,510VAC, ground input at 2210VAC, and ground output at 1390 VAC. It is certified by IEC/EN/UL/CSA 62368-1, 61010-1, 61010-2-201 and E/UKCA low voltage, EMC and RoHS directives
