Atmel has released Atmel Studio 7, the company’s comprehensive, free integrated development environment (IDE) for MCU design using Atmel SMART ARM processor-based and AVR MCUs.
Texas Instruments (TI) has introduced what it believes to be the industry’s fastest half-bridge gate driver for discrete power MOSFETs and IGBTs that operate up to 600V.
TDK’s CLF-NI-D series of rugged power inductors for use in automotive electronics feature high efficiency and reliability over a very wide temperature range extending from -55C to +150C and offer rated inductance values from 1μH to 470μH (E6 series).
Si8920 isolated amplifiers from Silicon Labs. The analog Si8920 amplifiers deliver robust galvanic isolation and the industry’s highest bandwidth and lowest signal delay.
Microchip has announced that PSA Peugeot Citroen is networking the coaxial-cable infotainment system of its Aircross SUV concept car using MOST® technology. Specifically, PSA PEUGEOT CITROËN is utilizing Microchip’s OS81110 and OS81118 MOST150 Intelligent Network Interface Controllers (INICs), which provide 150 Mbps performance and support all MOST network data types.
Latest from Littelfuse is the 59022 Series Firecracker reed sensor, a compact, cylindrical, magnetically operated sensor capable of switching up to 265VAC/300VDC at 10W/VA.
The new AZV5001 headset detection IC from Diodes Incorporated is aimed at cost- and power-sensitive consumer electronics such as mobile phones, tablet computers and media players.
The Atmel SAMW25 SmartConnect Wi-Fi module is the industry’s first fully-integrated FCC-certified Wi-Fi module with a standalone microcontroller and hardware security from a single source. The SAMW25 delivers a secure plug-and-play solution, integrating wireless technologies with the design flexibility required for Internet of Things (IoT) designers.
The first three devices in its new 1 Form A VOR family of hybrid solid-state relays have been introduced by Vishay. They are designed to deliver high reliability and noiseless switching for telecommunications, industrial, security system, and metering applications.
ISSI’s family of IS25LP (2.5V / 3V) and IS25WP (1.8V) series Flash devices with AEC-Q100 support, the family builds on the success of ISSI’s IS25LQ (2.5V/3V) and IS25WQ (1.8V) family by introducing leading edge features such as double data rate (DTR/DDR) interface modes, SFDP support, and the popular 2 cycle instruction input (QPI mode).
The Texas Instruments (TI) TPS92512/HV are 2.5A step-down (buck) current regulators with an integrated MOSFET to drive high current LEDs. Available with 42V and 60V (HV) input ranges, the LED drivers operate at a user-selected fixed-frequency with peak-current-mode control and deliver exceptional line and load regulation, says the company.
The Freescale PF3000 power management IC (PMIC) is developed as a companion device to Freescale’s i.MX 7 series and i.MX 6SoloLite and i.MX 6SoloX series of application processors, the PF3000 is a single-chip power management solution.
TDK-Lambda’s CCG30S series DC-DC converters feature an industry-standard 1 x 1 inch footprint, a 4:1 input range and are enclosed in a six-sided, shielded metal case.
A tough 1.8V to 3.3V, high-resolution inductance-to-digital converter for short-range, high-speed, contactless sensing of position, rotation, or motion, the LDC1101 has been introduced by Texas Instruments (TI).
A new 1A, 100V input capable synchronous step-down switching regulator, the LT8631 has been introduced by Linear Technology. Synchronous rectification delivers efficiency as high as 90% while Burst Mode operation keeps quiescent current under 7µA in no-load standby conditions.
Designed for DC to radio frequency (RF), intermediate frequency (IF), and high-speed time-domain applications, the Texas Instruments (TI) LMH6401 is a versatile wideband, digitally-controlled, variable-gain amplifier (DVGA).
The Texas Instruments TPA3140D2 is an efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers at up to 10W/6ohm or 8ohm (per channel).
Designed for automotive inductive load-switching applications, such as window, door latch and antenna relays, solenoids and small DC motors, the DMN61D8LVTQ dual-channel inductive-load driver has been introduced by Diodes Incorporated.
