Analog Devices’ ADA4177 is introduced as the industry’s first and most robust operational amplifier to integrate input protection against signal excursions of 32V beyond the supply rails, and 70dB of rejection for electro-magnetic interference (EMI) above 1GHz.
New from Texas Instruments, the bq40z50-R1 battery pack manager / gas gauge incorporates patented Impedance Track technology. The fully-integrated, single-chip, pack-based solution provides a rich array of features for gas gauging, protection, and authentication for 1-series, 2-series, 3-series, and 4-series cell Li-Ion and Li-Polymer battery packs.
Intersil has introduced the ISL94203 3-to-8 cell battery pack monitor to support lithium-ion (Li-ion) and other battery chemistries used in medical mobility carts, wheelchairs, e-bikes, handheld power tools, vacuum cleaners and solar or renewable energy storage systems.
Three new series of heavy-duty interconnects from TE Connectivity (TE), the UIC 552, 568 and 541 series of connectors are designed for rail and mass-transit applications.
The Texas Instruments (TI) TPS92513/HV series offers 1.5A step-down (buck) current regulators with an integrated MOSFET to drive high current LEDs. Available with 42V and 60V (HV) input ranges, the LED drivers operate at a user selected fixed-frequency with peak-current mode control and deliver excellent line and load regulation, says the company.
Microchip has announced the expansion of its eXtreme Low Power (XLP) PI microcontroller (MCU) portfolio. Features of the new PIC24F GB4 family include an integrated hardware crypto engine with both OTP and Key RAM options for secure key storage, up to 256KB of Flash memory and a direct drive for segmented LCD displays, in 64-, 100- or 121-pin packages.
Omron’s D2FS ultra-subminiature basic switch is simply constructed to ensure high reliability over a long period of time, making it ideal for detecting tampering and sabotage on meters, says the company.
Fairchild Semiconductor’s FGD3325G2_F085 EcoSPARK 2 N-Channel Ignition IGBT is aimed at applications such as automotive ignition coil driver circuits and coil-on-plug systems.
Microsemi has introduced a new ANSI/VITA 42.3-2014-compliant PCI Express interface XMC form factor serial advanced technology attachment (SATA) solid state drive (SSD) for industrial and defence applications where ultimate security for data-at-rest is required.
Analog Devices has introduced an ultra low-power buck regulator that extends battery life in portable devices by achieving the industry’s highest ultra-light-load power conversion efficiency.
New from Murata Power Solutions, the D1U54-D-1200 series of DC-input front-end 1000VRMS isolated power supply provides a 12Vdc output at 1200W, with a standby voltage at up to 20W. With a power density of 28W per cubic inch, the slim 54.5mm width and 1U height format minimizes space inside to maximize user utility, and user rear panel area.
The SAM D10 and SAM D11 SMART ARM-Based Microcontrollers from Atmel, the SAM D10/D11 are low-power microcontrollers based on a 32-bit ARM Cortex -M0+ processor operating at a maximum frequency of 48MHz.
Toshiba Electronics Europe is to enhance its portfolio of ARM Cortex-based microcontrollers with the development of the new TXZ family of microcontrollers that support low-power consumption and high-speed operation for IoT and M2M ecosystems.
Amphenol’s RADSOK power-to-board product line, the portfolio offers many options for delivering high current and single-point connections to PCBs, all incorporating Amphenol’s proven proprietary RADSOK technology, which is designed specifically to meet today’s demand for higher current, more efficient power connections to achieve greater system integration.
Microchip has added the LAN9353, LAN9354 and LAN9355 three-port, 10/100 Industrial Ethernet switches to its reliable, high-quality, and high-performance portfolio of Ethernet solutions, which includes Ethernet switches, controllers, bridges and PHYs.
The Texas Instruments (TI) LMH6401 5GHz wideband, digitally-controlled, variable-gain amplifier (DVGA) is designed for DC to radio frequency (RF), intermediate frequency (IF), and high-speed time-domain applications.
The Texas Instruments (TI) bq296xyz family offers high accuracy, low-power over-voltage protectors with a 1mA regulated output supply for Li-Ion battery pack applications.
RECOM’s RAC03-SER/277 Series regulated AD/DC converters are aimed at applications such as building automation and security / communication systems. Offering 3kVAC isolation, the ultra-compact series is designed to offer low stand-by consumption of 40mW max. and an ultra-wide input voltage range of 85-305VAC.
